Fix New Install Of XP Home SP2 - Now No Device Drivers (Solved)

Home > Windows Xp > New Install Of XP Home SP2 - Now No Device Drivers

New Install Of XP Home SP2 - Now No Device Drivers

Contents

I tried adding a different, separate USB hub with the same results. I've had my new computer almost a year now with this problem and it was the only one in the office of over 200 computers that did this. If this is not enough, use the Windows Network Problem Solver. If your computer then works as it did before, you have again gained some time. navigate here

The Network Connections window stops responding ("hangs") or closes immediately after you select a network connection and then click Properties. Make a note of the name of the driver and check whether it changes. If you keep having the problem, uninstall the program altogether. You can do this even while you still have the error message on your screen. http://www.bleepingcomputer.com/forums/t/356225/new-install-of-xp-home-sp2-now-no-device-drivers/

How To Install Windows Xp From Cd

The firewall asks only once for each program that tries to open a listening port. Editor] I downloaded the network version of Service pack 2 and attempted to install it several times. If you are using the XP boot floppy setup disks skip to step #5. 4. Removing Service Pack 3 Back to Top You can use Add or Remove Programs to remove SP3 and restore your computer to its previous state.

code1. Before plugging the USB device in, open the device manager and drop the tree where your USB hubs are listed, in there whatever is plugged into port 1 for instance will Now recently she purchased a logitech usb microphone, and when she plugs it in, the Add hardware wizard appears and nothing works. It has been reported that this procedure may has to be performed after installing Service Pack 2, not before as indicated in at least one of the MS documents.

Ive been there and its not a good place to be ! Windows Xp Download The preferred choice is NTFS. A driver is only needed for Windows 98. Feb 10, 2007 #17 nick carntowan TS Rookie Perhaps the c:\i386 folder would help me too.

Download the full service pack (some 270 MB) or have it sent to you on a CD, then apply it again. Uninstall the third party software. Then go into Control Panel, Security Center and click on the firewall Recommendations button. Look for message "booting from CD" usually located at the bottom of the screen.

  1. So simple solution!
  2. I recently bought a new camera and couldn't get it to install on my laptop, even though my old camera still works fine when connected to the same usb port.
  3. Report PLCARSO- Nov 9, 2009 11:02AM Reinstalled windows XP lost sound no audio device however it says it is working properly very baffled Report Bill› [email protected] - Jun 16, 2009 08:20PM
  4. I think this is what happened to me possibly.
  5. The last step is to enter a username and watch the XP desktop appear, ready for use.
  6. Log in with Facebook Log in with Twitter Log in with Google Your name or email address: Do you already have an account?
  7. I tried following the tips on the page, but got to a SP3 cabinet file instead of SP2.
  8. I'm hoping this is not a side effect of my traditional installation procedure.
  9. In Safe Mode uninstall the Service Pack.
  10. If you want only ping responses without file and printer sharing, click on the Advanced tab, then the ICMP Settings button.

Windows Xp Download

The list of unblocked programs is shown on the second firewall tab (Exceptions). http://www.michaelstevenstech.com/cleanxpinstall.html This documentation is archived and is not being maintained. How To Install Windows Xp From Cd Got my new hardware to run fine. Dell Support It is best to download the latest one from the manufacturer's web site and use that.

Only the New Connection Wizard icon appears, or one or more dial-up connections also appear. check over here It may only improve the disk performance. So many people are having similar problems and this is the first time any of the advice given has worked for me. I have had a hard time trying to get my files off of the old computer, since it doesn't have a cdrw, floppy, or any removable rewritable media.

reply thank you so much Chris! The choices will be: Advanced Configuration and Power Interface (ACPI) PCACPI Multiprocessor PC ACPI Uniprocessor PC Advanced Configuration and Power Interface (ACPI) PC Compaq SystemPro Multiprocessor or 100% Compatible PC MPS Once the format process completes the installation will continue. http://computersciencehomeworkhelp.net/windows-xp/pc-problems-help-win-xp-home.html Her computer is running Windows XP Home Service Pack 2 with the latest updates from Microsoft Update.

Thanks I put together a new computer for a friend of mine consisting of a MSI K8M Neo-V mainboard and a Sapphire Raden 9550 graphics card. If your computer does not support booting from the CD, check your OEM or Motherboard makers web site for updated BIOS. If the computer does not even run in safe mode, this probably means that you have a different problem.

Looked in comment - January 15, 2010 - 10:32am Matt!

Press any Key when you see the prompt to 'Press Any Key" 4a. If possible it would be a good idea to use Imaging software like Ghost or Disk Image to create an image of the partition before clean installing. If you disable your antivirus software before you install the service pack, be sure that you are aware of the risks involved, and be sure to enable it after the service Upgrade the drivers to the latest versions, particularly hard disk controller drivers (RAID, SATA, others), graphics adapter drivers, and USB related drivers, but some other older drivers can also cause problems.

If a bootdisk other than the essentials is used, smartdrv.exe must be added and loaded manually before running WINNT.EXE If the system you have files and setting on the drive is It could save many headaches, but now you know. Right-click on the hard disk in Windows Explorer, select Properties, Tools, Check disk for errors. weblink After installing XP SP2 and motherboard drivers through a utility provided by MSI that downloads the latest drivers from the web as well as ATI drivers I started getting bluescreens.

A quick way to enable Guest network access is to type the following command at a command prompt: net user guest /active:yes Background information: As long as the Guest account is Access Denied The Setupapi.log file contains references that indicate that one or more registry keys could not be deleted while the Setup program was running. You have to open several ports to be able to use SQL Server. Best regards, John Seal reply The c:\windows\inf folder is Chris Wolfe - August 10, 2007 - 3:33pm The c:\windows\inf folder is hidden.

So far, the only way I was able to get things installed was to say no to an Internet search and then ask to install the drivers manually from a location Windows XP Does Not Respond at "Setup Is Starting Windows XP" Message http://support.microsoft.com/kb/310760/ If this does not solve the problem, please read the next chapter, "Cannot install Service Pack 2". I decided to locate the "fixccs.exe" file in the temporary folder location of the Service Pack 2 (once extracted) and I renamed it to fixccs_back.exe. After spending days Googleing for a similar problem (nothing on the Desktop 7000 transceiver driver issue), finally I found this page by searching only for the mouse.

Write this key down and secure it in a safe place in case the original is misplaced or destroyed through natural causes. 20. Click on the Advanced tab. C:\WINDOWS\inf\USBSTOR.INF is really a cabinet file, but the lower-case named version isn't. To boot into safe mode, press F8 a few times after the BIOS has finished its booting and Windows begins to load.

Media. With XP/SP2, maybe u'll have to install UAA ftp://ftp.hp.com/pub/softpaq/sp32501-33000/sp32646.exe before nstalling Realtek High Definition.